Description
HUE-WATER- is a two-component, 52% solids, floor coating for interior concrete and cement-based overlays.
SURFACE PREP- Concrete surface must be dry and clean, free of dust, dirt, oil, grease, paint, glue, non-acrylic sealers, curing agents, florescence, chemical contaminants, rust, algae, mildew and other foreign matter that may serve as a bond breaker.
COVERAGE- HUE-WATER should be applied as first coat approximately 25 - 175 sq. ft. per gallon 9 - 13 wet, 7.6 - 11 mils cured. For smooth surface or second coat ap-proximately 200 - 250 sq. ft. per gallon 6.4 - 8 mils wet, 5.4 - 6.8 mils cured, varies due to porosity of substrate.
4:1 MIXING:
1. Pour one part B into four parts A.
2. Mechanically mix (with Jiffy style mixer) both parts A and B for three minutes at medium speed.
NOTE: Kits are premeasured for convenience.
Available in more than 200 standard colors and now and, with the power of the tinting station, all these colors, and more are available nearly instantly at any of our participating distributor centers. We can even match your desired color palette from a different manufacturer such as Sherwin-Williams, Dupont, Baer, Valspar or Scott Paints. Or, if you're looking for a bit more panache, we can also perform themed color matching such as State University colors, Professional sports teams themes or even your favorite movie or television show! Just come into any one of our ON DEMAND distribution centers to see how we can help you create your dream floor!
Specifications and Properties Dura-Kote Colored Water Based Concrete Epoxy for Floors:
Coverage 125-175 square foot per gallon catalyzed product (varies widely based on application method)
VOC Rating 175 g/L
Solids Content 52%
Shelf Life 1 year in original unopened container
Mixing Ratio 4 parts A to 1 part B
Pot Life 1 hour
Ready for recoat dry to the touch (4-18 hours)
Light Duty Use 16-30 hours
Full Cure 5-14 days
Test Data for Colored Water Based Concrete Epoxy for Floors:
Appearance (cured) Gloss sheen
Water Resistance Excellent, beads water
Mechanical Stability Excellent
Light Stability Fair
Odor Epoxy
Application Temperature 50 - 90 degrees Fahrenheit
